Top.Mail.Ru

Perm scientists have developed a new type of reactor for producing synthesis gas

Scientists at Perm Polytechnic University have developed a new reactor design in which layers of catalyst alternate with layers of spherical metal particles: they allow heat to flow faster inside the tubes, due to which it is distributed evenly. The press service of PNIPU reports this.

“Our device for producing synthesis gas contains a reactor chamber - a hollow cylinder, inside of which 30 channels (tubes) of increased diameter are installed and a heating system, which is a central pipe with holes for heat release. The channels themselves are filled with alternating layers of catalyst (nickel with ceramics) and a layer of metal balls. This design ensures equal heating and increases reactor productivity by 30%,” says Nikolai Kondrashov, chief project engineer at PNIPU.

Scientists obtained this result during tests of a prototype device at a domestic nuclear industry enterprise.

The developed reactor operates on the following principle: carbon dioxide and water vapor under pressure are supplied into the central pipe and set on fire, thereby heating the walls to 900 degrees. Hydrocarbon raw materials, for example, methane, are pumped into the reaction channels; it passes through layers of metal balls and a catalyst, where the substances are converted into a mixture of hydrogen and carbon monoxide. As a result, the resulting synthesis gas is removed from the device.

A new type of reactor by Perm Polytechnic scientists is designed to increase the productivity of synthesis gas in the Russian chemical industry. The proposed design ensures reliability and efficiency, reducing costs and increasing the yield of useful product.