Security zones of gas pipelines are provided to protect gas pipelines from damage and prevent accidents. This is a territory with special conditions of use, established along gas pipeline routes and around other gas system facilities in order to ensure normal operating conditions.
Agricultural work is permitted in the protected zones, but construction is prohibited. Work on reconstruction of existing buildings, structures and networks must be agreed upon with the organization that maintains and operates the gas pipeline. The work that is prohibited to be carried out in the security zone also includes the arrangement of basements, compost pits, welding work, installation of fences, creation of landfills and storage facilities, installation of stairs resting on the gas pipeline.
What is the width of the gas pipeline security zone?
To answer this question, you need to decide what type of gas pipeline you are interested in:
The security zone of a gas pipeline with pressure over 1.2 MPa is established by the “Rules for the Protection of Trunk Pipelines” and is a plot of land limited by conditional lines running 25 m from the axis of the pipeline on each side. At the same time, for underwater crossings, the security zone, in the form of a section of water space from the water surface to the bottom, is 100 m from the axis of the gas pipeline in each direction.
The security zone of a gas pipeline with a pressure of up to 1.2 MPa is established by the “Rules for the Protection of Gas Distribution Networks” and is an area limited by conditional lines running at a distance of 2 meters on each side of the gas pipeline. In this case, the size of the security zone increases in the case of:
underwater passage of the gas pipeline through navigable and floating rivers, lakes, reservoirs, canals - 100 m on each side;
gas pipelines on permafrost soils - 10 m on each side;
laying a satellite wire along the polyethylene gas pipeline - 3 m from the gas pipeline on the side of the wire and 2 m on the opposite side;
laying an inter-settlement gas pipeline through forests or trees and shrubs - 3 meters on each side.
Important to note:
The concept of a gas pipeline security zone should not be confused with the minimum permissible distances from the gas pipeline to buildings and structures.
The minimum permissible distances from a gas pipeline with pressure over 1.2 MPa to buildings and structures must be taken depending on the class and diameter of pipelines, not less than those indicated in Table. 4 SP 36.13330.2011 Main pipelines.
For example, for an underground main gas pipeline of the first category with a nominal diameter of 1200 mm and a pressure of 5.4 MPa, the security zone is 25 m on each side, and the minimum permissible distance to the border of a city or holiday village is 300 m, to a 1st category highway – 225 m, to a separate non-residential building – 175 m.
The minimum permissible distances from a gas pipeline with a pressure of up to 1.2 MPa to buildings and structures must be taken, depending on the pressure of the gas pipeline, not less than those specified in Appendices B, B SP 62.13330.2011* Gas distribution systems.
For example, for an underground steel gas pipeline with a nominal diameter of 100 mm, pressure over 0.1 MPa and up to 0.3 MPa, the security zone is 2 m on each side of the gas pipeline, and the minimum permissible distance to the foundation of a residential building is 4 m, to the curb stone of a highway is 1.5 m.